LinuxカーネルHack: git commitからgit send-emailでGMailアカウントを用いたパッチ送信まで
はじめてBtrfsにパッチを投げてみました。修正は単純で、メモリー確保後のチェックをより厳密にしただけです。Btrfsの開発コミュニティはBUG_ON撲滅に向けて動いているのに、BUG_ONを増やしてしまいました。http://www.mail-archive.com/linux-btrfs@vger.kernel.org/msg08420.html 現時点ではコードが取り込まれるかどうかはわかりません。リジェクトされるかもしれません。btrfs-unstableで取り込まれたら、メインラインへのマージはほぼ確実なので、今からワクワクです。リジェクトされたとしても、パッチ送信までの手順を踏めたのは大きいです。
で、今回は、参考までにパッチ送信までの流れを記録として残しておきます。
コミット
まず、修正したコードをコミットする。
fixme@xr:~/btrfs-unstable$ git commit -a
コミットログを書いておく。
To make Btrfs code more robust, several return value checks where memory
allocation can fail are introduced. I use BUG_ON where I don't know how
to handle the error properly, which increases the number of using the
notorious BUG_ON, though.
パッチの作成
git format-patchコマンドでパッチを生成する。コミットした直後のコードのパッチを作成したいので、「-r HEAD~」を指定。「-s」で「Signed-off-by」を付与するように指定。「-o」でパッチの出力ディレクトリを指定。今回は「--numbered」は不要だった。特に意味は無さそうだけど、リネームしておいた。
fixme@xr:~/btrfs-unstable$ git format-patch -r HEAD~ --numbered -s -o ~/btrfs_patch fixme@xr:~/btrfs_patch$ mv 0001-To-make-Btrfs-code-more-robust-several-return-value-.patch fix-uncheck-memory-allocations.patch
生成されたパッチを見ると、Subjectにコミットログが侵食してたので修正した。
fixme@xr:~/btrfs_patch$ mv 0001-To-make-Btrfs-code-more-robust-several-return-value-.patch fix-uncheck-memory-allocations.patch fixme@xr:~/btrfs_patch$ emacs fix-uncheck-memory-allocations.patch ---------------------- From d94d7f73323de012d4fe9f85736ae59a32513c5a Mon Sep 17 00:00:00 2001 From: Yoshinori Sano <yoshinori.sano@gmail.com> Date: Sat, 12 Feb 2011 19:36:17 +0900 Subject: [PATCH] fix uncheck memory allocations To make Btrfs code more robust, several return value checks where memory allocation can fail are introduced. I use BUG_ON where I don't know how to handle the error properly, which increases the number of using the notorious BUG_ON, though. Signed-off-by: Yoshinori Sano <yoshinori.sano@gmail.com> --- fs/btrfs/compression.c | 6 ++++++ fs/btrfs/extent-tree.c | 2 ++ fs/btrfs/file.c | 8 ++++++-- fs/btrfs/inode.c | 5 +++++ 4 files changed, 19 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/compression.c b/fs/btrfs/compression.c index 4d2110e..f596554 100644 --- a/fs/btrfs/compression.c +++ b/fs/btrfs/compression.c @@ -340,6 +340,8 @@ int btrfs_submit_compressed_write(struct inode *inode, u64 start, WARN_ON(start & ((u64)PAGE_CACHE_SIZE - 1)); cb = kmalloc(compressed_bio_size(root, compressed_len), GFP_NOFS); + if (!cb) + return -ENOMEM; atomic_set(&cb->pending_bios, 0); cb->errors = 0; cb->inode = inode; @@ -354,6 +356,10 @@ int btrfs_submit_compressed_write(struct inode *inode, u64 start, bdev = BTRFS_I(inode)->root->fs_info->fs_devices->latest_bdev; bio = compressed_bio_alloc(bdev, first_byte, GFP_NOFS); + if (!bio) { + kfree(cb); + return -ENOMEM; + } bio->bi_private = cb; bio->bi_end_io = end_compressed_bio_write; atomic_inc(&cb->pending_bios); diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 565e22d..aed16f4 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -6931,6 +6931,8 @@ static noinline int get_new_locations(struct inode *reloc_inode, struct disk_extent *old = exts; max *= 2; exts = kzalloc(sizeof(*exts) * max, GFP_NOFS); + if (!exts) + goto out; memcpy(exts, old, sizeof(*exts) * nr); if (old != *extents) kfree(old); diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index b0ff34b..4895ad2 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -181,10 +181,14 @@ int btrfs_drop_extent_cache(struct inode *inode, u64 start, u64 end, testend = 0; } while (1) { - if (!split) + if (!split) { split = alloc_extent_map(GFP_NOFS); - if (!split2) + BUG_ON(!split || IS_ERR(split)); + } + if (!split2) { split2 = alloc_extent_map(GFP_NOFS); + BUG_ON(!split2 || IS_ERR(split2)); + } write_lock(&em_tree->lock); em = lookup_extent_mapping(em_tree, start, len); diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index c9bc0af..40bbe00 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -287,6 +287,7 @@ static noinline int add_async_extent(struct async_cow *cow, struct async_extent *async_extent; async_extent = kmalloc(sizeof(*async_extent), GFP_NOFS); + BUG_ON(!async_extent); async_extent->start = start; async_extent->ram_size = ram_size; async_extent->compressed_size = compressed_size; @@ -384,6 +385,7 @@ again: (BTRFS_I(inode)->force_compress))) { WARN_ON(pages); pages = kzalloc(sizeof(struct page *) * nr_pages, GFP_NOFS); + BUG_ON(!pages); if (BTRFS_I(inode)->force_compress) compress_type = BTRFS_I(inode)->force_compress; @@ -644,6 +646,7 @@ retry: async_extent->ram_size - 1, 0); em = alloc_extent_map(GFP_NOFS); + BUG_ON(!em || IS_ERR(em)); em->start = async_extent->start; em->len = async_extent->ram_size; em->orig_start = em->start; @@ -820,6 +823,7 @@ static noinline int cow_file_range(struct inode *inode, BUG_ON(ret); em = alloc_extent_map(GFP_NOFS); + BUG_ON(!em || IS_ERR(em)); em->start = start; em->orig_start = em->start; ram_size = ins.offset; @@ -1169,6 +1173,7 @@ out_check: struct extent_map_tree *em_tree; em_tree = &BTRFS_I(inode)->extent_tree; em = alloc_extent_map(GFP_NOFS); + BUG_ON(!em || IS_ERR(em)); em->start = cur_offset; em->orig_start = em->start; em->len = num_bytes; -- 1.7.1
メール送信の準備
以下を参考にコマンドラインからGMailのアカウントでパッチ送信できるように準備した。
- http://www.omappedia.org/wiki/Releasing_to_Linux_kernel_using_patches_and_emails#GIT_patch_creation
- http://d.hatena.ne.jp/janus_wel/20090120/1232481948
fixme@xr:~/btrfs-unstable$ sudo apt-get install git-email fixme@xr:~/btrfs-unstable$ sudo apt-get install msmtp fixme@xr:~/btrfs-unstable$ sudo apt-get install ca-certificates fixme@xr:~/btrfs-unstable$ cat ~/.gitconfig [user] name = Yoshinori Sano email = yoshinori.sano@gmail.com [sendemail] smtpserver = /usr/bin/msmtp fixme@xr:~/btrfs-unstable$ cat ~/.msmtprc # Example for a user configuration file # Set default values for all following accounts. defaults tls on tls_trust_file /etc/ssl/certs/ca-certificates.crt logfile ~/.msmtp.log # My email service account gmail host smtp.gmail.com port 587 from yoshinori.sano@gmail.com auth on user yoshinori.sano@gmail.com password secret # Set a default account account default : gmail fixme@xr:~/btrfs-unstable$ chmod 600 ~/.msmtprc
メールの送信
git send-emailコマンドでメールを送信。しばらくして、特に問題なくメール送信完了。メーリングリストへの投稿を確認。http://www.mail-archive.com/linux-btrfs@vger.kernel.org/msg08420.html
fixme@xr:~/btrfs-unstable$ git send-email --from "Yoshinori Sano <yoshinori.sano@gmail.com>" --envelope-sender "Yoshinori Sano <yoshinori.sano@gmail.com>" --to linux-btrfs@vger.kernel.org --smtp-debug ~/btrfs_patch /home/fixme/btrfs_patch/fix-uncheck-memory-allocations.patch (mbox) Adding cc: Yoshinori Sano <yoshinori.sano@gmail.com> from line 'From: Yoshinori Sano <yoshinori.sano@gmail.com>' (body) Adding cc: Yoshinori Sano <yoshinori.sano@gmail.com> from line 'Signed-off-by: Yoshinori Sano <yoshinori.sano@gmail.com>' From: Yoshinori Sano <yoshinori.sano@gmail.com> To: linux-btrfs@vger.kernel.org Cc: Yoshinori Sano <yoshinori.sano@gmail.com> Subject: [PATCH] fix uncheck memory allocations Date: Sat, 12 Feb 2011 20:17:13 +0900 Message-Id: <1297509433-15183-1-git-send-email-yoshinori.sano@gmail.com> X-Mailer: git-send-email 1.7.1 The Cc list above has been expanded by additional addresses found in the patch commit message. By default send-email prompts before sending whenever this occurs. This behavior is controlled by the sendemail.confirm configuration setting. For additional information, run 'git send-email --help'. To retain the current behavior, but squelch this message, run 'git config --global sendemail.confirm auto'. Send this email? ([y]es|[n]o|[q]uit|[a]ll): y OK. Log says: Sendmail: /usr/bin/msmtp -f yoshinori.sano@gmail.com -i linux-btrfs@vger.kernel.org yoshinori.sano@gmail.com From: Yoshinori Sano <yoshinori.sano@gmail.com> To: linux-btrfs@vger.kernel.org Cc: Yoshinori Sano <yoshinori.sano@gmail.com> Subject: [PATCH] fix uncheck memory allocations Date: Sat, 12 Feb 2011 20:17:13 +0900 Message-Id: <1297509433-15183-1-git-send-email-yoshinori.sano@gmail.com> X-Mailer: git-send-email 1.7.1 Result: OK In git 1.7.0, the default has changed to --no-chain-reply-to Set sendemail.chainreplyto configuration variable to true if you want to keep --chain-reply-to as your default.
追記(2011/02/15)
メールでのパッチ投稿時のフォーマットについては、これが参考になる。
http://linux.yyz.us/patch-format.html